Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 39659000 GU39659000 39 65 90 00
 3965 9000 3965.9000 39.65.90.00

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Cagiva Elefant E750, Ducati 748

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

 This part is due back in stock soon, call 01484 841395 to reserve yours

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Brembo master cylinder overhaul kit / rebuild kit for overhauling foot operated PS11B and PS11C master cylinders. Includes all seals and brake grease. Can also be used to repair handlebar master cylinders 10477610 and 10477650

This seal kit replaces Guzzi part numbers 66139790

 1 in stock

 10436241 GU10436241 10 43 62 41
 1043 6241 1043.6241 10.43.62.41

Also fits Ducati Monster S2R, Ducati 748 SP, Biposto, Ducati 750 SS (1992), Ducati 750 SS (1994), Ducati 888 (1993-), Ducati 900 SS (1992), Ducati 900 SS/SL (1994-1997), Ducati 916 (1994), Ducati 916 Monop.-Senna (1995-), Ducati 916 SP (1996), Ducati Monster 900 (1993), Ducati Monster 900 (1994), Ghezzi Brian Supertwin,

Top / uppermost piston ring

 This part is available by special order, request a quote

 19060750 GU19060750 19 06 07 50
 1906 0750 1906.0750 19.06.07.50

Pair of sintered EBC FA095 HH brake pads for Brembo 5165 single pin four piston calipers

With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round. We advise checking your front caliper(s) have one not two pad pins

 2 in stock

30654602-z 30654602 GU30654602 30 65 46 02
 3065 4602 3065.4602 30.65.46.02

Rebuild kit for Grimeca F05 (P5) type calipers with 32mm pistons

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

Replacement piston seals and spring for Grimeca front master cylinder

See BRA28278 for a complete replacement master cylinder

 Sorry, this part is no longer available.

 30659330 GU30659330 30 65 93 30
 3065 9330 3065.9330 30.65.93.30

Pair of Ferodo FRP408 brake pads for Brembo 5165 4 piston single pin calipers

We advise checking your front caliper(s) have one not two pad pins.
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors Highest friction level available for motorcycle racing Developed by world champions for future world champions Stable friction level achieving excellent modulation Fast bedding-in period Applications to fit all major racing calipers Suitable for stainless steel and cast iron discs

 2 in stock

30654602-z 30654602 GU30654602 30 65 46 02
 3065 4602 3065.4602 30.65.46.02

Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.

NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722

 2 in stock

 20391310 GU20391310 20 39 13 10
 2039 1310 2039.1310 20.39.13.10

Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)